The Ghost Immobiliser
Immobilisers are an effective tool to fight vehicle theft. They stop the vehicle from starting if it does not have an ignition key fob. They also work well to stop hotwiring and other traditional methods of vehicle theft. However, newer methods like key replication and relay theft are becoming more widespread.
The Ghost Immobiliser is designed to fight these new trends and make your car unnoticeable. It's silent and stealthy and does not use key fobs, radio signals or LED indicators.
Easy to install
The Ghost Immobiliser is an innovative device that connects to the CAN data network in your vehicle to prevent key theft and cloning. It is a TASSA approved product, and insurance companies endorse it. It is almost undetectable by thieves and operates in silence. It makes use of buttons on your steering wheel, centre console, and doors to create an unique pin code sequence that has to be entered before you are able to start your car. You can create up to 20 different sequences in order to increase security. The system is easy to install and does not require any additional wiring or hardware.
To ensure the highest quality results It is recommended that you select a reputable CAN immobiliser installer who is skilled in your specific vehicle. It is ideal if they have a workshop in your local area, allowing you to visit and have your installation completed. They will also have a range of tools and materials to help you in the process of installing. They will have basic hand tools, a multimeter, and insulation tape and heat shrink tubing to secure connections. A user's manual will offer specific instructions for your vehicle's wiring.
Disconnect the battery before beginning the installation to prevent short circuits or airbag deployment. It is crucial to confirm the exact location of the CAN H and L wires, as an incorrect identification could result in unintentional system integration. It is also a good idea to label or mark the wires. Also, use a multimeter to verify that the power source identified has a reliable 12V supply.
Advanced thieves can employ different methods to get around the Ghost Immobiliser, which includes jamming and spoofing signals. These methods are based on amplifying the signal sent from your key fob to the vehicle's electronic control unit. However, with advanced anti-jamming technology and a vigilant surveillance you can shield your vehicle from these sophisticated attacks.
Security Increased
A ghost immobiliser provides an additional layer of protection to your car against theft. It is a PIN code security system that can be activated by pressing buttons on your dashboard or steering wheel, making it difficult for thieves to access the device and steal your vehicle. The device is also designed to be hidden within the vehicle, and is devoid of lights or other indicators that could signal a potential criminal to its presence. It is directly connected to the ECU of your car through the data bus. This means it isn't vulnerable to relay attacks or hacking.
The system is a valuable investment for those who own prestige vehicles, as they are at greater risk of theft due to their worth and the popularity. Its advanced features shield your vehicle from key duplicates and ECU swapping. Ghost immobilisers can be paired with apps, so you can arm or disarm quickly. They may have a service/valet setting that allows you temporarily deactivate the immobiliser during repairs or service.
Ghost immobilisers also have a wonderful benefit: it doesn't require any wire cutting. This is a great feature, especially if you have a newer car which does not come with built-in immobiliser technology. Certain systems also work with GPS tracking devices, adding an extra layer of security to your vehicle. A GPS tracker can also reduce your insurance costs. If you decide to purchase a ghost immobiliser be sure it is TASSA verified and a professional installer installs it for you.
Compatible with all major brands and models
The Ghost Immobiliser was designed to work with all major models and makes, securing your prized possessions from theft. It generates a unique pin number by pressing buttons on your steering wheel, console, or door panels. You must enter this code before you are able to drive. The system is secure, undetectable, and is covered by a three-year warranty. It is also fully endorsed by insurance companies. This means you can lower your insurance premiums.
The Ghost system differs from the normal immobilisers, which use the key fob to provide ignition control. It is connected directly to the engine controller through the CAN bus. This means that it is tamper proof, virtually impossible to remove or disable and cannot be hacked by organised car thief groups. Additionally to this, Ghost is tamper-proof, meaning that it is virtually impossible to disable or remove. Ghost system can be linked with a secure iPhone application that permits remote management and monitoring.
You can set an PIN code that is easy to remember, but mathematically, it is impossible for thieves to determine. The PIN can be customised and changed at any point so that you can ensure your vehicle is secure even if you park it on the street or in a public parking lot. ghost immobiliser birmingham can also choose valet or service mode in the event that someone else requires your vehicle temporarily or when it is in the garage. This feature is also an excellent way to stop your vehicle from being taken by a shady mechanic. You can choose a Ghost Call alert to give you more peace of mind. It will notify you when your vehicle is moving or has been moved.
Convenience
The ghost immobiliser guards your vehicle from theft methods like key cloning or relay attacks. It is activated by connecting to the car's CAN network and blocking communication with the engine ECU. This makes it hard for criminals to hack or copy your vehicle.
Once installed, you will need to enter a PIN code up to 20 digits long using the buttons on your dashboard or steering wheel to begin the engine. The system is completely hidden and unnoticeable to thieves since it doesn't emit any radio frequency signals. It can also be set to an individual-changeable PIN code which further adds to its security. The system is designed to stop circuit-cutting, making it almost impossible to hack.
If you happen to forget your PIN, there are some systems that allow you to communicate with the immobiliser via an app on your phone to disarm it immediately. Some even come with the option of a service/valet mode, which allows you to start your car temporarily, such as when you need to drop it off for servicing or valet parking.
The Ghost Immobiliser also is undetectable by thieves, as it does not transmit radio signals. This is a major benefit over other security systems that are sold aftermarket. Additionally, it is simple to use and doesn't require any complex wiring. It can be used in combination with dash cams to provide added safety. Dash cam Thinkware F70 features clear and crisp 1080p HD footage Format Free Technology, and parking mode. The system can also be hardwired to ensure optimal performance and longevity.
Installation
If you're looking to safeguard your vehicle from thieves it is important to select the right immobiliser. This device can prevent car theft by blocking the communication between your engine controller unit (ECU) and key fobs. This device prevents thieves from intercepting and cloning the signal to start your vehicle. It also detects the presence of a tamper and alert the vehicle owner.
The device is easy to install and can be used with the existing systems in your vehicle. It doesn't require any modifications to the vehicle wiring and can be positioned in a hidden location such as under the dashboard. Follow the instructions in the manual to ensure that the device is properly installed. After installation, it is important to test the system. This will ensure the immobiliser ghost works as intended.
You can purchase an Autowatch Ghost 2 Immobiliser from a certified installer and have it installed in your vehicle. The installer will connect Ghost to your vehicle's CAN Bus system, making it harder for thieves to take over the system or bypass it. The installation process generally takes between 2 and 3 hours.
When installing the Ghost it is recommended that you look up the wiring diagram for the model of your vehicle. This will allow you to locate the CAN High and CAN Low wires required to connect the Ghost to your vehicle's engine. Double-check all connections to ensure they are secure and insulated.
Once the installation is complete and you are able to use the Ghost Immobiliser during normal operation. It will disable the ignition of your vehicle if it is not able to start it with the correct PIN, which you will need to enter yourself. The ghost of the immobiliser can be changed to Service/Valet Mode for when you require your vehicle to be to be serviced or valet-parked.